DYNALAL - PRESSURE REDISTRIBUTION SURFACES - LOW AIR LOSS
|Weight Capacity||Up to 1000 lbs|
|Inflated Dimension||36″ x 80″ x 9.5″ (standard) *other widths and lengths available|
|Weight||33 lbs (standard)|
|Air Cell Material
|Cover Material||Quilted fabric with polyurethane coating|
||Woven Polyester fabric with PVC backing|
|Safety Standard||Meets open flame requirements(FCC 16CFR 1633)|
|Inflation Time||Under 1 minute|
|Functions||Alternation Cycle (5 – 95 min) 16 comfort levels; Auto Firm; Static Mode; Lock-out Capability; Fowler Function, Auto-Memory Reset; Low Air Loss|
|Power requirement||100~240 volt, 50/60Hz, 5 Amp|
|Size||16.5″(L) x 6.7″(W) x 10.6″(H)|
|Max. Air-flow||1200 lpm|
For individuals unable to tolerate a moving surface, the “static” mode provides constant low-pressure for comfortable pressure relief.
Cycle times can be set from 5-95 min. to best meet the treatment needs of each individual. Cells alternate in a 3:1 ratio so that the individual is always supported by 2/3 of the cells.
This feature provides, within seconds, a stable surface for patient transfers and nursing procedures (returns to alternation mode after 30 min. if auto-firm is not deactivated).
16 soft/firm settings are available for easy comfort adjustment. This allows the caregiver to fine tune therapeutic support and optimize comfort based on weight.
This will alert the caregiver in the event of a power failure, leaving bed, sensor disconnect and bottoming-out.
“TRUE” LOW AIR LOSS TECHNOLOGY
Air escapes from 72 laser-cut openings and distributes equally under a vapour-permeable, quilted cover that acts to wick moisture away from the individual.
DEEP CELL ALTERNATION THERAPY
18 independent 8 inch high cells gently inflate and deflate in a 3:1 cycle.
16 Comfort levels for different weight ranges
Pressure in the cells will pulsate without complete offload.
This design channels heat away from the interior of the DynaLAL, promoting a bacteria-free environment as well as ensuring a cool and comfortable climate.
ADJUSTABLE SECURITY TIES
Eight ties secure the system to any standard hospital bed frame.
BUILT-IN ALARM SYSTEM
Alarm sound will alert caregiver in the event of a power failure, sensor disconnect, bottoming out and falling out of bed.
FOWLER PRESSURE FUNCTION
This function adds extra air to support the hips and lower back when the head of the bed is raised above a 25 degree angle.